Home Page > Cisco > 640-802

Download Cisco.Braindump2go.640-802.v13.2.by.Chamara.184q.vce

Exam: Cisco Certified Network Associate (CCNA)
Size: 13.47 MB
Posted: 2012-08-29
Votes: 0
Download: Cisco.Braindump2go.640-802.v13.2.by.Chamara.184q.vce

Vote For This File

Type the characters from the picture.


* The most recent comments are at the top.

    • SomeGuy from Ukraine 11 06 2011, 8:40 PM Report Spam
      What's the score??
    • Wanze from Germany 10 24 2011, 6:57 AM Report Spam
      Here i not sure what the rigt answer is:

      Refer to the exhibits(omitted). MOH has been configured to run from flash at the BR1 site. The HQ Phones and MOH server are placed in the Default region through the Default device pool. The BR1 phones are placed in the BR1 region through the BR1 device pool. The region configuration between Default and BR1 only permits G.729 codec.

      When an IP phone user at the HQ site places a BR1 caller on hold, the BR1 caller hears tone on hold. Which of the following can cause this issue?

      A: Multicast routing is not enabled on the BR1 router
      B: The command ip pim separate-dense-mode is missing from the interface VLAN 120 at the SRST router in BR1
      C: The MOH server is unable to stream MOH using G.711 codec because of the regions configuration.
      D: The command route must be added to the multicast moh port 16384 command at the SRST router in BR1.
      E: the Max Hops is too small in the MOH configuration.

      Some Practice exams mean B some C.

      The full question (pics from the configs) you found here:

      http://content.yudu.com/Library/A1twvx/Cisco642427Troublesh/resources/3.htm (Page 3 to 14)

    • Wanze from Germany 10 24 2011, 6:03 AM Report Spam

      Refer to the exhibit. When a call is placed to extension 3001, the associated remote destination 907700990255 does not ring. Which CSS is responsible for extending the call to the remote destination?

      Your Choice C: The Calling Party Transformation CSS is responsible.

      My Choice B: The Rerouting Calling Search Space is responsible.


      From the drop-down list box, choose a calling search space to use for rerouting.

      The rerouting calling search space of the referer gets used to find the route to the refer-to target. When the Refer operation fails due to rerouting of the calling search space, the Refer Primitive rejects the request with the "405 Method Not Allowed" message.

      The redirection (3xx) primitive and transfer feature also uses the rerouting calling search space to find the redirect-to or transfer-to target.

    • Wanze from Germany 10 24 2011, 5:59 AM Report Spam
      Next wrong answer found:

      Refer to the exhibits. End-to-end RSVP with local RSVP fallback has been configured on the HQ Cisco Unified Communications Manager. RSVP between the locations that are assigned to the IP phones and SIP trunk at the HQ site is configured as mandatory. When a call is placed from an HQ phone to a BR phone, the end-to-end RSVP request fails.

      Refer to the SDI trace. Which statement about the call is true?

      In your Guide is the correct answer:

      E: The call will proceed as a normal call with no RSVP reservation.

      I mean it´s A: The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur.

      What we not see in your dump is the SDI trace:

      09:51:20.229|//SIP/SIPTcp/wait_SdlReadRsp: SignalCounter=482|1,100,56,1.484^^*
      09:51:20.229|SIPSocketProtocol(1,100,9,115)::handleReadComplete send SdlReadRsp: size 359|*^*^*
      09:51:20.229|//SIP/SIPTcp/wait_SdlReadRsp: SdlRead bufferLen=359|1,100,56,1.485*^*
      09:51:20.229|//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from on port 5060 index 30 with 359 bytes:

      SIP/2.0 580 Precondition Failed

      Via: SIP/2.0/TCP;branch=z9hG4bKab5a849974
      From: sip:2001@;tag=ae2783cb-9687-4fc7-a1d0-8108b8b3679a-24863375
      To: sip:3001@;tag=1714620935
      Date: Wed, 0505 2010 16:51:20 GMT
      Call-ID: 6ccaf980-be11a208-3e-a05010a@
      CSeq: 101 INVITE
      Allow-Events: presence
      Content-Length: 0

    • Wanze from Germany 10 24 2011, 3:32 AM Report Spam
      When a Cisco Unified Communications Manager Express advertises the directory number pattern in the exhibit, what would the learned pattern be in the RTMT tool on the Cisco Unified Communications Manager?

      In your Guide is the correct answer:

      B: 4XXX and the ToDID will be 0: +19725554XXX

      I mean it´s D: 4XXX and the ToDID will be 0: 1972555

      Found in Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Foundation Learning Guide, 2nd Edition, Side 386


Site Search:

Site Search:

Terms of Service

Proudly powered by www.iexamcollection.com